Sun, Dec 22, 2024
Quality, the key to sustainable development
Cold mix asphalt Design with emulsion bitumen
Cold mix asphalt Design with emulsion bitumen
from 0 Vote
- Category : Asphalt mixture and bitumen
List of services
| # | Service | Quantity |
|---|---|---|
| 1 | Selection of average sample of coarse soil to perform various tests up to 50 kg | 10 |
| 2 | Standard Test Methods for Laboratory etermination of Water (Moisture) Content of Soil and Rock by Mass | 1 |
| 3 | Granulation test by mechanical method on coarse-grained soil up to grade 4 sieve | 7 |
| 4 | Granulation test by mechanical method on sandy or fine-grained soil under grade 4 sieve (according to س م ب127) | 3 |
| 5 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3(2,700 kN-m/m3)) | 5 |
| 6 | Separation of materials by dry method on different sieves and mixing them to obtain the desired granulation weighing up to 50 kilograms | 10 |
| 7 | Standard Test Method for Penetration of Bituminous Materials | 2 |
| 8 | Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) | 1 |
| 9 | Standard Test Method for Ductility of Bituminous Materials | 1 |
| 10 | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene | 1 |
| 11 | Standard Test Method for Distillation of Emulsified Asphalt | 2 |
| 12 | Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts | 1 |
| 13 | Standard Practice for Identifying Cationic Emulsified Asphalts - A | 1 |
| 14 | Standard Test Method for Determining Cement Mixing of Emulsified Asphalt | 1 |
| 15 | Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) | 1 |
| 16 | Standard Test Method for Recovery of Asphalt From Solution by Abson Method | 1 |
| 17 | Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator | 1 |
| 18 | Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures by benzene | 1 |
| 19 | Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures by trichloroethylene, | 1 |
| 20 | determination of passing filler content | 1 |
| 21 | Preparation of Three Test Specimens of single HMA and determining Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus | 22 |
| 22 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures (By determining the relevant parameters (according to MS2)) | 66 |
| 23 | surcharge for 30904 and 30908 rows because of Heating and mixing asphalt mixture in lab | 1 |
| 24 | Determination of silicon dioxide in cement | 1 |
| 25 | Determination of aluminum oxide in cement | 1 |
| 26 | Determination of iron oxide in cement | 1 |
| 27 | Determination of calacium oxide in cement | 1 |
| 28 | Determination of magnesium oxide in cement | 1 |
| 29 | Determination of sodium oxide in cement | 1 |
| 30 | Determination of potassium oxide in cement | 1 |
| 31 | Determination of sulfur trioxide in cement | 1 |
| 32 | Determination of insoluble Residue in cement | 1 |
| 33 | Determination of mass loss on ignition in cement | 1 |
Your rating to this service
Related Services
-
Address : Tehran, North Kargar St., above Jalal Al Ahmad Highway, next to Tehran University, No. 1464
-
working hour : 24/7
-
Phone : 021-41463000
-
Fax: 88025420
-
Email : info@tsml.ir
-
Postal Code : 1439955981
-
Email of the housing cooperative company : taavoni.maskan@tsml.ir
Online users :
85
Today's visit :
914
Total visit :
826984
Your IP address :
18.119.117.77
Browser :
ClaudeBot
Browser version :
1
Operating system :